A model for retention on short, intermediate and long time-scale in ferroelectric thin films

We developed a model with no adjustable parameter for retention loss at short and long time scale in ferroelectric thin-film capacitors. We found that the predictions of this model are in good agreement with the experimental observations in the literature. In particular, it explains why a power-law function shows better fitting than a linear-log relation on a short time scale (10^-7 s to 1 s) and why a stretched exponential relation gives more precise description than a linear-log plot on a long time scale (>100 s), as reported by many researchers in the past. More severe retention losses at higher temperatures and in thinner films have also been correctly predicted by the present theory.Comment: 15 pages and 3 figure

Unipolar and bipolar fatigue in antiferroelectric lead zirconate thin films and evidences for switching-induced charge injection inducing fatigue

For the first time, we show that unipolar fatigue does occur in antiferroelectric capacitors, confirming the predictions of a previous work [Appl. Phys. Lett., 94, 072901 (2009)]. We also show that unipolar fatigue in antiferroelectrics is less severe than bipolar fatigue if the driving field is of the same magnitude. This phenomenon has been attributed to the switching-induced charge injection, the main cause for polarization fatigue in ferroelectric and antiferroelectric materials. Other evidences for polarization fatigue caused by the switching-induced charge injection from the nearby electrode rather than the charge injection during stable/quasi-stable leakage current stage are also discussed.Comment: 10 pages and 2 figure

Statistical switching kinetics in ferroelectrics

By assuming a more realistic nucleation and polarization reversal scenario we build a new statistical switching model for ferroelectrics, which is different from either the Kolmogorov-Avrami-Ishibashi (KAI) model or the Nucleation-Limited-Switching (NLS) model. After incorporating a time-dependent depolarization field this model gives a good description about the retardation behavior in polycrystalline thin films at medium or low fields, which can not be described by the traditional KAI model. This model predicts correctly n=1 for polycrystalline thin films at high Eappl or ceramic bulks in the ideal case

An Imaging and Spectral Study of Ten X-Ray Filaments around the Galactic Center

We report the detection of 10 new X-ray filaments using the data from the {\sl Chandra} X-ray satellite for the inner $6^{\prime}$ ($\sim 15$ parsec) around the Galactic center (GC). All these X-ray filaments are characterized by non-thermal energy spectra, and most of them have point-like features at their heads that point inward. Fitted with the simple absorbed power-law model, the measured X-ray flux from an individual filament in the 2-10 keV band is $\sim 2.8\times10^{-14}$ to $10^{-13}$ ergs cm$^{-2}$ s$^{-1}$ and the absorption-corrected X-ray luminosity is $\sim 10^{32}-10^{33}$ ergs s$^{-1}$ at a presumed distance of 8 kpc to the GC. We speculate the origin(s) of these filaments by morphologies and by comparing their X-ray images with the corresponding radio and infrared images. On the basis of combined information available, we suspect that these X-ray filaments might be pulsar wind nebulae (PWNe) associated with pulsars of age $10^3 \sim 3\times 10^5$ yr. The fact that most of the filament tails point outward may further suggest a high velocity wind blowing away form the GC.Comment: 29 pages with 7 figures and 3 pages included. Accepted to Ap

Environmental impacts of grazed pastures

Large nitrogen (N) surplus and return of excreta-N in localised patches at high N rates in intensively grazed pasture systems markedly increases the risk of N losses to waterways and the atmosphere. Here are described the main routes of N input to grazed pastures, losses via N leaching, methane (CH4) and nitrous oxide (N2O) emissions. Furthermore farm N budgets and N use efficiency in relation to management strategies that can be applied to reduce N losses are discussed. Nitrate leaching increases exponentially with increased inputs and is closely related to urine patches, which also influence the leaching of dissolved organic N. High N2O emission rates in grazed pastures are related to fertiliser-N or N in excreta combined with compaction by animal treading. Grazing may considerably reduce CH3 emissions compared to indoor housing of cows. Pastures are occasionally cultivated due to sward deterioration followed by a rapid and extended period of N mineralization, contributing to an increased potential for losses. Good management of the pasture (e.g. reduced fertiliser input and reduced length of grazing) and of the mixed crop rotation during both the grassland and the arable phase (e.g. delayed ploughing time and a catch crop strategy) can considerably reduce the negative environmental impact of grazing. It is important to consider the whole farm system when evaluating environmental impact. In particular for green house gasses since the pasture may serve as a source of N2O and indirectly of CH3, but also as a sink of CO2 influenced by management practices on the farm

Application of the morphological alpha shape method to the extraction of topographical features from engineering surfaces

In contrast to the mean-line based filters, morphological filters are function oriented and more suitable for the functional prediction of component performance. This paper presents a novel morphological method based on the alpha shape for the extraction of topographical features from engineering surfaces. Compared to the traditional implementation of morphological filters, the alpha shape method is more efficient in performance for large structuring element. The resulting envelope follows the form of the surface all over such that the distortions caused the end effects are avoided. A series of measured surfaces from the automotive cylinder liner and the bioengineering femoral heads are analyzed using the morphological alpha shape method. The topographical features are successfully extracted, enabling further analysis to the components

Coupled KdV equations derived from atmospherical dynamics

Some types of coupled Korteweg de-Vries (KdV) equations are derived from an atmospheric dynamical system. In the derivation procedure, an unreasonable $y$-average trick (which is usually adopted in literature) is removed. The derived models are classified via Painlev\'e test. Three types of $\tau$-function solutions and multiple soliton solutions of the models are explicitly given by means of the exact solutions of the usual KdV equation. It is also interesting that for a non-Painlev\'e integrable coupled KdV system there may be multiple soliton solutions.Comment: 19 pages, 2 figure

PDMS/PVA composite ferroelectret for improved energy harvesting performance

This paper address the PDMS ferroelectret discharge issue for improved long- term energy harvesting performance. The PDMS/PVA ferroelectret is fabricated using a 3D-printed plastic mould technology and a functional PVA composite layer is introduced. The PDMS/PVA composite ferroelectret achieved 80% piezoelectric coefficient d33 remaining, compared with 40% without the proposed layer over 72 hours. Further, the retained percentage of output voltage is about 73% over 72 hours

Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods

Freeform surfaces are replacing traditional surfaces and have significantly reduced volume and weight and highly improved performance in modern complex optic systems, bio-systems and other disciplines [1]. These high-precision freeform components are enabled by state-of-the-art micro-machining technologies, compromising mechanical methods (diamond turning and polishing etc.), physical methods (laser beam and ion beam machining), and chemical methods (lithography, electro-chemical machining etc.). However, a fundamental pre-requisite to achieve the potential growth to these high-added value freeform components is to measure and characterize these components with the required accuracy such that their manufacturing quality can be controlled. The surface topography is a fingerprint of all process stages of the manufacturing process. Thus identifying and evaluating these topographical features on freeform surfaces left by production techniques are critically important in that they could present an indication of the manufacturing quality and offer feedback to the process control

Dark matter dominated dwarf disc galaxy Segue 1

Several observations reveal that dwarf galaxy Segue 1 has a dark matter (DM) halo at least ~ 200 times more massive than its visible baryon mass of only ~ 103 solar masses. The baryon mass is dominated by stars with perhaps an interstellar gas mass of < 13 solar masses. Regarding Segue 1 as a dwarf disc galaxy by its morphological appearance of long stretch, we invoke the dynamic model of Xiang-Gruess, Lou & Duschl (XLD) to estimate its physical parameters for possible equilibria with and without an isopedically magnetized gas disc. We estimate the range of DM mass and compare it with available observational inferences. Due to the relatively high stellar velocity dispersion compared to the stellar surface mass density, we find that a massive DM halo would be necessary to sustain disc equilibria. The required DM halo mass agrees grossly with observational inferences so far. For an isopedic magnetic field in a gas disc, the ratio f between the DM and baryon potentials depends strongly on the magnetic field strength. Therefore, a massive DM halo is needed to counteract either the strong stellar velocity dispersion and rotation of the stellar disc or the magnetic Lorentz force in the gas disc. By the radial force balances, the DM halo mass increases for faster disc rotation.Comment: 5 pages, 2 figures, accepted for publication in MNRA